KJN Enterprisesremoves the confusion from air jets and nozzles You do NOT need hundreds of different nozzles. All air amplifying nozzles produce air flows up to 25 times the compressed air consumed. Different nozzles have different outlet sizes and the more air used, the greater the force produced. Noise reduction up t0 10 dBA is typical as well as reduced air consumption when compared to open jets and tubes. The most important reason to use air nozzles or jets is safety. All KJN air nozzles and jets meet OSHA standard CFR 1910.242(b) for dead end pressure. Noise levels are dramatically lower with air nozzles and jets in addition to lower energy use.Air Nozzle Cluster:An Air Nozzle Cluster can use a large amount of compressed air. A cluster of air jets can be much more efficient by using less compressed air and with just as much energy for blow off.
Anodized Aluminum Air Nozzle is a common standard strength nozzle with a 1/8” male NPT connection and ideal for most blow-off applications involving liquids.
Air Nozzles is the brass nozzle added to a copper tube. Machine builders can bend the copper tube and aim the nozzles to where ever it suits. The copper tube is simply press fit into the customer’s system.
Air Nozzles Applications:
Air Nozzles is made adjustable. The superior design of the adjustable set screw is made to adjust the nozzles within its weakest and strongest ranges.
The Nex Flow™ Air Mag™ Air Nozzle is a star type profile nozzle with a unique “patent pending design” to assist in focusing the compressed air from the supply line and entrained air from the surroundings to a more sharp laminar flow of air with the highest force per SCFM on the market. This both reduces compressed air energy use and noise levels significantly as compared to open jets and pipe as well as outperforming similar star style designs. Even replacing competitive air nozzles can provide significant cost savings in energy. The nozzle is of rugged, cast zinc, single piece design ideal for harsh environments.
Model 47004AMF – is the first product of the The Nex Flow™ Air Mag™ “patent pending” star profile air amplifying nozzle and has the best force/air consumption ratio known. Ideal when higher force required in blowoff applications.
Sound Level 74 dBA at 3 ft. (0,91m) at 80 psig (5.5 bar)
This is a brass nozzle added to a copper tube.
Machine builders can bend the copper tube and aim the nozzles to where ever it suits. The copper tube is simply press fit into the customer's system.