|Size||2 in to 54 in|
|Material||Aluminium and SS|
Silent X-Stream Air Blade is easy to mount and maintain thereby reducing compressed air consumption and noise levels. It is the most efficient design for air knife curtain blow-off technology. This reduces noise levels and provides optimum blow-off energy. It produces a “laminar” flow of air using the Coanda effect. This draws a large volume of air from the surrounding area along with the small amount of compressed air from the Air-Blade. It also produces an output flow up to 40 times. The air knife system payback on compressed air savings can be seen in some applications.Air-Blade Air Knife X-Stream make up a full flow design with rear port mounting. This avoids interference in the entrained air flow. It also optimizes air amplification and minimizes noise levels. It is gold coated for longer life.
|Size||3" - 54"|
|Inlet Port||1/4" NPT|
|Operating Medium||Compressed Air|
|Operating Pressure||6 Bar|
The Silent X-Stream(TM) Air-Blade(TM) air knife provides increased efficiency and very low noise levels compared to the Standard Air Blade(TM) air knife. Both units utilize the quality Haug static bars - the RN bar for most applications or the extra strong VS bars (Triple X versions) for very high static charges and extremely high speeds.
The Silent X-Stream(TM) Air-Blade(TM) air knife uses a small amount of compressed air for a powerful, and adjustable force with "laminar" flow to eliminate charges in applications where static bars cannot reach or where high speeds are a factor.
Normally the Standard Model RN Haug brand static bar can address most applications. For extremely high speeds and high charges the extra powerful VS model is used. For wash-down applications (such as pharmaceutical areas), even a washable model is available at extra cost.
All Haug static bars come with a patented safety connector and fully shielded cable. The power supplies are "repairable" and are so well made, that we offer a two year warranty on them (one year on the bars).
Static Eliminator - Air-Blade(TM) Ionizer Features:
· Connections on the back or ends
· It flows from end to end (full flow).
· Stainless steel models are available for high temperature and corrosive models.
· Models are designed for easy cleaning and prevention of dirt entering the static bar, minimizing potential damage.
· Patented connectors with the ground intrinsic to the cable design.
· Instant ON/OFF with no moving parts.
· Repairable Power Supply with a two year warranty.
Static Eliminator - Air-Blade(TM) Ionizer Benefits:
· Flexible mounting options.
· Units can be mounted end to end for longer lengths with no air gap.
· High temperature, extra strength, and even a unique washable stainless steel model is available for special applications or as required.
· Ease of cleaning and maintenance.
· No separate ground connection that can be cut and cause sparks or accidentally shock personnel.
· Conserves air use when not required.
· Eliminates one costly area which is power supply replacement. 2 year warranty assure quality product.
|Size||2 in to 54 in|
Hardened X-Stream Air Blade Air Knife, already used extensively for replacing rows of nozzles or jets or drilled pipe to reduce energy is now available with a special hard coated surface over its aluminum body for mildly corrosive environments and to address any abrasive contact to the surface. Priced only slightly above the price of regular anodized aluminum Nex Flow™ X-Stream™ Air Blade™ Air Knives these units can sometimes eliminate the need to go to more costly and heavy stainless steel units and save hundreds of dollars in cost! As with the regular anodized aluminum units, the new Hardened X-Stream™ Air Blade™ comes complete with a stainless steel shim to set the air gap (most others use cheap plastic which can wear out quickly) and are held together with stainless steel screws. Its Available in 2”, 3”, 6”, 9”, 12”, 18”, 24”, 30”, 36”, 42”, 48” and 54” lengths as standard they can also be coupled together using a coupling kit for longer spans.The Nex Flow™ X-Stream™ Air Blade™ has proven to be of high quality, high performance and one of the most quiet, if not “the most quiet” designs on the market for all types of blow-off and cooling applications.
Air Knife X-Stream™ Air-Blade™ are a full flow design with rear port mounting to avoid interference with entrained air flow, optimizing air amplification and minimizing noise levels. It comes in three versions:
*Your information is safe with us.
|Size||3" - 54"|
|Material||Aluminium & SS|
Air Knife Standard Air Blade is easy to install and maintain. It can reduce both compressed air consumption and noise levels. It produces a “laminar” flow of air using the Coanda effect. This draws a large volume of air from the surrounding area along with the small amount of compressed air from the Air-Blade. It also produces an output flow up to 30 times. The air knife system payback on compressed air savings can be seen in some applications.
Special lengths of our Air-Blade™ are available on special order including lengths combining several units.